WEATHER STATION

WEATHER STATION

Our weather station, chart/nav cache mod.

This is a project we’ve been wanting to tackle for a while now and even though there has been no shortage of ‘additions’ for R.E.D. this winter requiring modifications, what’s one more?

We found a great piece of white oak at our local lumber yard.  It’s really a very high end place and every time we visit we drool over the beautiful exotic woods…beautiful teak, wenge, tiger wood, mahogany.  They also supply all the bells and whistles needed for any craftman’s hobby from fine carvings and beyond.

But back to our white oak.  For last year’s wood trim project (link here and here) it was advised that if we didn’t want to mortgage our life away using teak that white oak was a great alternative as it is very resistant to moisture and was quite often used in ship building.

image

Wood Cost

Really!  When you can walk away with a purchase for any boat and pay this little, it’s a good day. $10 for a piece that will serve this project and more than enough leftover for a couple more that Captain has rolling around in his head. The extra $10 charge was for plaining from 1″ to 5/8″ and cutting in two.

Our Go-To Wood Place

Our Go-To Wood Place

Now on to the making of…

We chose the piece that had the most attractive grain which will hopefully show up well when stained and finished.

image

White Oak

Onboard R.E.D. there is always enough cardboard for making design templates. We do love our beer and wine.

Template

Template

Because we are cutting into an area which could have structural implications, a backing plate will be glued and riveted in place.  A secondary benefit will be to soften the edging around the fibreglass so we won’t cut ourselves when accessing the hatch.

Backing Plate Design on Baltic Birch Plywood

Backing Plate Design on Baltic Birch Plywood

 

Now we’re ready to go back to the boat to check that the template is accurate before cutting.

Door Front with Backing Plate

Door Front with Backing Plate

We had a little ‘discussion’ about the shape of the door – a conflict between Francois’ love of wood and my wanting to keep with the existing lines in the cabin. A compromise was reached (Francois’ interpretation: the Galley Kat won this one)

image

Measure Twice. Cut Once.

 

image

Holes in Each of the Four Corners ( 1.5″)

 

image

Dremel to Cut Fibreglass

 

image

Door Opening (5″ x 15″)

 

The foam core material was removed and relocated under our black water bladder, startboard V-berth.

 

image

Hardwood Backing Plate

 

Backing Plate Riveted

Backing Plate Riveted

 

image

Magnet Door Closure

 

image

New Simpler Door Design (7″ x 17″)

 

The Finish (Primer, Tint, Urethane)

The Finish (Primer, Tint, Urethane)

 

Piano Hinge Secured w/ SS Screws

Piano Hinge Secured w/ SS Screws

 

image

Hydrometer, Barometer, Thermometer

 

 

Chart Storage

Chart Storage

 

A Place to Hide All Precious Cargo

A Place to Hide All Precious Cargo

 

WEATHER STATION
Ingredients
  • White pine planed to 5/8″
  • Plywood for backing plate
  • Cardboard for template
  • Barometer
  • Hydrometer
  • Thermometer
  • 16 x 5/8″ SS screws
  • 15.5″ SS piano hinge
  • Primer
  • Wood Stain
  • Urethane Finish
  • 2 Magnet Door Closures
  • PL Glue
Instructions