Looking for a reliable universal power tilt and trim solution for small to mid-size outboard setups? This guide highlights five compatible options that help motor stability, easier handling, and improved planing. Each product is suited for different engine HP ranges, mounting styles, and user needs. Whether you want simple manual-override capabilities or full electronic tilt and trim control, these choices cover common setups from 2 HP to 35 HP and beyond. The table below compares key features to help you decide quickly.
| Product | Best For | Setback | Max Tilt/Trim |
|---|---|---|---|
| Camoo PT-35 Tilt and Trim | Small outboards, 2-35 HP | 5.5″ | 84° tilt, 5.5″ setback |
| Boating Accessories 3002.1017 PT-35 | 41 HP equivalent projects | 5.5″ | 84° |
| HOLDWELL 8M0090335 | Mercury 75-115 HP variants | — | — |
| Bob’s Machine 100-701100 | All-in-one tilt/trim with wiring | — | — |
| JAVENYIMAN 8M0090335 | Mercury 75-115 HP, 2-wire | — | — |
Camoo PT-35 Tilt and Trim Kit
Best for entry-level installations on small outboards, the PT-35 supports up to 35 HP. It features a 5.5-inch setback to improve stability and prop bite at higher prop settings. The kit is designed for bolt-on and clamp-on motors within an 11-inch frame, and does not require an adapter for compatible models. This makes it a practical choice for DIY projects and casual boaters.
Who it’s best for: weekend boaters and anglers with smaller motors seeking improved planing and ease of tilt adjustments without complex wiring. Why selected: broad compatibility and an ergonomic setback that enhances performance on calmer waters.
Caution: Verify motor frame compatibility before installation to avoid mounting conflicts. Some boats may need additional supports for a secure fit.
T-H Marine 3002.1017 PT-35 Tilt and Trim
Rated for 35 HP and smaller motors, this model provides a 5.5-inch setback to boost stability and performance. It offers 84 degrees of trim and tilt, enabling precise motor angle adjustments for varied water conditions. It is a solid option for compact boats where maneuverability and efficient prop bite matter most.
Who it’s best for: boaters needing reliable tilt/trim without heavy-duty horsepower demands. Why selected: a well-balanced option with clear performance benefits at a modest engine size.
Caution: Consider the mounting layout on your particular transom to ensure compatibility with existing hardware.
HOLDWELL Outboard Tilt & Trim Assembly
Designed for Mercury engines in the 75–115 HP range, this two-wire assembly focuses on reliable trim control and tilt functions. It is suitable for anglers and cruisers who require precise, dependable adjustments to optimize performance at higher power. The kit is compact and integrates with common Mercury motor layouts.
Who it’s best for: boaters upgrading mid-range Mercury outboards to improve stability and handling. Why selected: compatibility with widely used Mercury models and straightforward two-wire control.
Caution: Ensure the specific Mercury model and year align with the part number, as some variants may need additional adapters.
Bob’s Machine Action Series Tilt and Trim
All-in-one tilt and trim unit that includes a relay assembly, wiring harness, and switch, with a maximum capacity of 40 HP. This makes it a practical all-in-one solution for small boats seeking a compact, integrated upgrade. It’s well-suited for users who prefer a turnkey kit without sourcing separate components.
Who it’s best for: boaters wanting a complete, single-package upgrade for light outboards. Why selected: bundled wiring and control components minimize the need for additional parts.
Caution: The 40 HP limit means it isn’t suitable for higher-horsepower engines, so plan accordingly based on your motor spec.
JAVENYIMAN 8M0090335 Tilt & Trim Assembly
Replacement part number 8M0090335 and 8M0171818, compatible with Mercury F-75 to F-115 engines in 2-wire, 4-stroke configurations. This option emphasizes precise trim adjustments to improve stability and steering balance, helping reduce turbulence and prop strain in varying water conditions.
Who it’s best for: Mercury-powered boats requiring a direct replacement tilt/trim from a trusted part number. Why selected: engineered to fit common Mercury outboards and maintain alignment with original mounting points.
Caution: Compatibility should be confirmed with your exact Mercury model and year before purchase.
3002.1017 52100 PT-35 for CMC PT-35
Specifically designed for CMC PT-35 tilt and trim units, this model supports up to 35 HP with a 5.5-inch setback. It highlights a 84-degree trim range and a smooth motor angle adjustment to achieve faster planing and better control in shallow waters. It also helps protect the prop by lifting the motor when needed.
Who it’s best for: boaters with a CMC PT-35 system seeking a compatible tilt/trim upgrade. Why selected: tailored to PT-35 installations, ensuring easier mounting and reliable operation.
Caution: Check that your existing PT-35 assembly matches the 52100 configuration for a direct fit.
Buying Guide: Key Considerations And Comparisons
- Engine compatibility: Confirm HP range and motor brand to ensure the tilt/trim unit will physically fit and operate correctly.
- Setback and trim range: A larger setback improves stability and prop bite; a wider tilt range offers more control in rough water or when loading heavy gear.
- Mounting style: Bolt-on vs clamp-on and whether adapters are needed. Some models fit 11″ frames without extra hardware.
- Integrated vs component kits: All-in-one packages simplify installation; modular kits allow you to mix and match wiring and controls.
- Electrical requirements: Two-wire versus more complex wiring affects ease of installation and power source needs.
- Protection and ergonomics: Look for features that protect the prop from debris and reduce back strain during tilting operations.
Common Scenarios And Recommendations
- Small recreational boats (2-35 HP): Camoo PT-35 or Boating Accessories PT-35 provide practical balance of cost and performance.
- Mercury engines in the mid-range (75-115 HP): HOLDWELL or JAVENYIMAN options offer direct compatibility for reliable operation.
- Integrated upgrades: Bob’s Machine Action Series Tilt and Trim is ideal when you want an all-in-one unit with wiring and switch included.
FAQ
- What does “tilt and trim” do for my outboard? It adjusts the engine angle to optimize planing, stability, and prop efficiency in different water conditions.
- Do these kits require professional installation? Some can be installed by capable DIYers; always verify mounting compatibility and electrical connections before proceeding.
- Can I use a PT-35 tilt and trim on any 35 HP motor? It supports 2-35 HP and is designed for bolt-on or clamp-on motors within its frame, but confirm fit with your specific model.
- Is setback important for planing? Yes, a larger setback can improve stability and prop bite at higher prop settings, aiding quick acceleration.
- Will these work with two-wire systems? Several options are designed for two-wire configurations; verify wiring requirements for your engine.
- What safety considerations exist? Ensure proper mounting, electrical isolation, and operation checks before full use to avoid prop or mounting failures.