Yes — a fixed kicker motor bracket is a practical upgrade for anglers, kayakers, and skiff owners who want a stable, easy-to-use auxiliary motor mount. These brackets support 7.5–20 HP outboards, provide secure mounting, and help with tilt, lift, and positioning. The top picks below are chosen for durability, compatibility with small engines, and straightforward installation. Best suited for: anglers needing reliable trolling stability; boaters with short transoms seeking a robust lift bracket; and DIY installers seeking corrosion-resistant hardware.
| Product | HP Range / Load | Mounting Type | Best For |
|---|---|---|---|
| Haida 2 Stroke Outboard Motor Bracket | Up to 20 HP | Fixed mounting with manual lift | Best for small boats needing a rugged, weatherproof stainless option |
| Vinland Marine Aluminum Outboard Bracket | 7.5–20 HP | Spring-loaded, adjustable positions | Best for adjustable height on jon boats or canoes |
| Mojiate Outboard Motor Bracket | 7.5–20 HP | 4-position vertical, stainless steel | Best for corrosion resistance and heavier mounting |
| Marinebaby Outboard Motor Bracket | 7.5–20 HP | 5-position, heavy-duty aluminum | Best for robust marine environments |
| Vinland Marine Outboard Mount Bracket (20 HP) | Up to 20 HP | Spring-loaded, five vertical positions | Best for versatile positioning and durability |
Haida 2 Stroke Outboard Motor Bracket for Boats
The Haida bracket is built to support two-stroke outboards up to 20 HP. Made with a 304 stainless steel main body and a plastic base, it combines strength with a lightweight design. Mounting dimensions are 4-7/16″ by 5-11/16″, with a roller size of 8-1/4″ by 10-3/8″. Best for: boaters needing a durable, corrosion-resistant option that handles moderate engine loads. Limitation: manual lifting is required to raise and lower the motor, which may be less convenient for frequent adjustments.
VELCKING MJ-1-DP Jack Plate 4” Setback
This jack plate offers adjustable height from 0 to 100 mm in 20 mm steps, enabling precise engine tuning for 0–35 HP motors. It includes rubber pad mounting blocks and stainless screws for secure, damage-free attachment. Best for: anglers and skiff operators who need repeatable height adjustments for different water conditions. Caution: a heavier mounting system may require careful balance on smaller transoms.
Camoo MJ-1-DP Jack Plate 4” Setback
Designed for clamp-on outboard motors up to 35 HP, this plate extends 4″ off the transom and includes a wooden mounting block for a secure fit. Best for: shorter transom boats needing a reliable, non-wolfram solution to align engine height. Limitation: included wooden block differs from all-metal mounting in terms of long-term water exposure resistance.
Vinland Marine Aluminum Bracket (7.5–20 HP)
Constructed from corrosion-resistant anodized aluminum, this bracket features a polypropylene (PP) base and a spring-loaded vertical position system with five settings. Best for: jon boats, bass trackers, or canoes needing a lightweight, adjustable mount for 7.5–20 HP engines. Caution: ensure the weight capacity aligns with your exact motor model to avoid stress on transom.
Mojiate Outboard Bracket 20 HP
Made of marine-grade stainless steel, this bracket offers a 4-position adjustable vertical system and a durable stamped stainless frame. Mounting base is plastic. Best for: users seeking a heavy-duty, corrosion-resistant option for 7.5–20 HP two-stroke motors. Limitation: plastic base may limit long-term grit resistance in harsh marine environments.
Marinebaby Aluminum Bracket 20 HP
Marinebaby’s heavy-duty aluminum bracket supports 2-stroke motors from 7.5 to 20 HP with a stainless steel counter-balance spring system and a solid polypropylene mounting board. Best for: equipment where counter-balance and a sturdy mounting surface are priorities. Caution: ensure compatibility with your exact transom thickness and shaft length.
Panther 55-0410 4-Stroke Bracket
Panel features five vertical running positions and a robust anodized aluminum bracket designed for 4-stroke engines with long or short shafts. Best for: longer boarding times and variable loads on larger tethered boats. Limitation: geared toward 4-stroke use; verify compatibility with your engine type before purchase.
Buying Guide
Key considerations when selecting a fixed kicker motor bracket include engine HP range, transom compatibility, and mounting stability. Look for materials suited to marine environments (stainless steel, aluminum with corrosion protection) and ensure the base and mounting hardware support the weight of your motor. Consider whether you need adjustable height for varying water conditions, and whether a spring-loaded or manual lift system best fits maintenance preferences. Check dimensions to confirm fit with your transom width and shaft length.
Practical Questions To Ask
- What is the engine’s maximum weight and HP, and does the bracket support it?
- Is the transom compatible with the mounting plate’s dimensions?
- Do I need adjustable height or a fixed position?
- What materials resist corrosion in saltwater environments?
- Does the bracket include mounting hardware and ensure a secure fit?
FAQ
- Can I install a 20 HP motor on a bracket designed for up to 20 HP? Yes, if the motor weight and shaft length match the bracket specifications.
- Is stainless steel more durable than aluminum for brackets? Generally, yes for saltwater exposure, though aluminum is lighter and resistant when anodized.
- Do brackets require professional installation? Most can be installed with basic tools; follow the manufacturer’s mounting instructions.
- Are there safety concerns with fixed brackets? Ensure secure attachment, proper weight distribution, and periodic checks for corrosion and wear.
- Can a fixed bracket be used on a short transom boat? Yes, provided the mounting dimensions fit and the engine height is appropriate for the hull.