Electric tilt and trim systems optimize boat handling, planing speed, and prop bite for small to mid-size motors. This guide highlights five solid options that suit anglers, weekend boaters, and DIY installers seeking reliable hydraulic or electric tilt and trim. Each pick is chosen for compatibility with up to 35 HP or similar outboards, ease of installation, and practical performance gains. The following overview helps buyers compare setup simplicity, stability, and ergonomic benefits.
| Product | Best For | Key Benefit |
|---|---|---|
| T-H Marine 3002.1017 52100 | Small motor setups | 5.5″ setback enhances stability |
| PT-35 Tilt and Trim & Wiring Harness Kit | Do-it-yourself installs | Includes wiring harness, 5 1/2″ setback |
| PT-35 for CMC PT-35 | Compact outboards | 84 degrees of tilt for fine adjustment |
| Bob’s Machine 100-701100 | All-in-one kits | Relay, wiring harness, switch included |
| Winibo Outboard Tilt & Trim | High payload needs | Up to 90 HP, robust aluminum build |
T-H Marine 3002.1017 52100 Tilt and Trim
Brand: Boating Accessories. Features: Rated for 35 HP and smaller motors, 5.5″ setback to enhance boat stability and performance, 84 degrees of trim and tilt. Best for entry-level installations where stability and a simple upgrade path matter. Limitation: assumes compatibility with standard bolt-on mounting patterns; check motor compatibility before installation.
PT-35 Tilt and Trim & Wiring Cable Harness Kit
Brand: Camoo. Features: PT-35 for up to 35 HP Outboard Motor – 5 1/2″ setback; compatible with bolt-on and clamp-on motors within 11″ frame; 5 1/2″ setback improves stability and prop bite. Best for DIYers who want a complete kit and broader mounting versatility. Caution: verify frame dimensions on your motor to ensure a proper fit.
PT-35 for CMC Outboard Motors Up to 35 HP
Brand: Bzcovac. Features: Enhanced stability with a 5 1/2-inch setback; raises motor to protect prop from shallow water or debris; 84 degrees of trim and tilt for flexible motor angle. Best for anglers and boaters who encounter variable water conditions. Limitation: confirms compatibility with CMC 35 HP class motors and similar bolt patterns.
Bob’s Machine 100-701100 Action Series Tilt and Trim
Brand: Bob’s Machine. Features: All-in-one unit with relay assembly, wiring harness, and switch; 40 HP maximum capacity. Best for buyers who want an integrated, ready-to-install package with fewer separate components. Caution: limited to 40 HP, which may exclude higher-horsepower needs.
3002.1017 52100 for CMC PT-35 Tilt and Trim Up to 35 HP
Brand: Bzcovac. Features: Enhanced stability with a 5 1/2-inch setback; protects prop and back with a simple switch activation; 84 degrees of trim and tilt. Best for boaters seeking a robust 52100 system with ergonomic tilting. Caution: ensure the 5 1/2″ setback fits your transom spacing and mounting area.
Buying Guide
What to consider when choosing electric tilt and trim:
- Motor horsepower compatibility: Most PT-35 and 52100 units target 35 HP and smaller; verify your outboard’s exact class.
- Setback and stability: A 5 1/2″ setback improves stability and prop bite at higher speeds and loads.
- Degrees of tilt and trim: 84 degrees offers broad angle adjustment for planning and maneuvering in variable water conditions.
- Installation complexity: Kits with wiring harnesses and relays simplify DIY installs; some models are more modular than others.
- Prop protection: Systems with easy motor raising help shield the prop from rocks, weeds, and debris.
- Ergonomics and back strain: Look for designs that reduce manual tilting effort, especially for frequent adjustments.
- Durability: Aluminum construction and corrosion resistance extend life in marine environments.
- Upgrade path: If you anticipate more powerful engines later, choose a system that scales or remains compatible with bolt-on or clamp-on configurations.
FAQ
- What does “5 1/2 inch setback” mean for boat performance? – It moves the motor mounting point rearward, improving boat stability and prop bite at mid-to-high speeds.
- Is 84 degrees of tilt necessary? – It provides wide adjustment to match load and water conditions, helping plane faster and with less bow rise.
- Can these units work with 40 HP motors? – Some models are designed up to 35 HP; others like Bob’s Machine cover up to 40 HP. Check the specific product’s HP rating.
- Do I need an external wiring harness? – Some kits include harnesses; others require additional wiring. Select a kit that matches your motor’s wiring needs.
- Are these units easy to install myself? – Many are designed for bolt-on or clamp-on motors and include mounting hardware; however, verify fit with your transom and motor pattern.
- What maintenance is required? – Regularly inspect electrical connections, lubricate moving joints if recommended by the manufacturer, and protect against corrosion.