When shopping for a 13 1/4 x 17 propeller, buyers want reliable performance for 40–140 HP outboards and stern drives. This guide highlights five solid aluminum options that balance strength, speed, and durability. Each prop is suited to different engine families and use cases, from daily freshwater cruising to faster acceleration on mid-range motors. The following selections emphasize compatibility, blade design, and spline counts to help you pick the best match for your Yamaha, BRP, Mercury, or Evinrude/Johnson-powered setup. Use the quick overview table to compare core details at a glance.
| Product | Brand | HP Range | Rotation | Material |
|---|---|---|---|---|
| 13 1/4×17-K Boat Propeller | DLNIG | 60–130 HP | RH | Aluminum |
| MiBarco 13 1/4×17 Upgrade Propeller | MiBarco | 40–140 HP | RH | Aluminum |
| 13 1/4 x 17-K Upgrade Aluminum Outboard Propeller | GELAIDI | 60–130 HP | RH | Aluminum |
| ARKDOZA 13 1/4×17 Aluminum Prop | ARKDOZA | 40–140 HP | Right | Aluminum |
| WONENGDA 13 1/4 x17 Stainless Steel Propeller | WONENGDA | 60–115 HP | RH | Stainless Steel |
DLNIG 13 1/4×17-K Aluminum Propeller
Reference design aligns with OEM blade geometry to enhance bow lift, acceleration, top speed, and bite while reducing slip. The propeller is sized 13 1/4 inches in diameter with a 17-K pitch and has 15 splines. Best for Yamaha outboards in the 60–130 HP range. This prop provides strong midrange performance for everyday cruising and better fuel efficiency when paired with the right engine setup.
- Best for Yamaha 60–130 HP Outboards
- 15-spline, RH rotation, 3 blades
- Aluminum construction for light weight and quick response
Caution: Aluminum props may wear faster under rough use or impact; inspect for dings after impact and replace if balance is compromised.
MiBarco 13 1/4×17 Upgrade Propeller
Designed as OEM replacements for BRP, Johnson, Evinrude, and OMC stern drives in the 40–140 HP range. The propeller features 13 1/4″ diameter, 17″ pitch, 15 splines, and three blades with RH rotation. It emphasizes durability and speed, with an emphasis on maintaining top-end RPMs and improving acceleration compared to older OEMs.
- Best for BRP, Johnson, Evinrude, OMC stern drives
- 3 blades, 15 splines, aluminum, RH rotation
- OEM-replacement alignment for reliable fit
Limitation: Some users report slight weight or cosmetic differences vs. genuine OEM parts; verify hub fitment for your model prior to installation.
GELAIDI 13 1/4×17-K Aluminum Propeller
This prop is pitched as an OEM substitute for Yamaha 60–130 HP engines. It uses a white finish and 15 splines with RH rotation, delivering 13 1/4″ diameter and 17″ pitch across a three-blade design. The manufacturer emphasizes durability, improved speed, and fuel efficiency, with a focus on maintaining RPMs without sacrificing top-end performance.
- Best for Yamaha 60–130 HP engines
- Lightweight, white finish; 15 splines
- Three blades for balanced bite and lift
Note: Some boats may require minor alignments or hub adjustments during installation for optimal balance.
ARKDOZA 13 1/4×17 Aluminum Prop
ARKDOZA targets BRP, Johnson, Evinrude, and OMC stern drives with 40–140 HP engines. The propeller uses 13 Spline teeth, a right-hand rotation, and a black powder-coated aluminum three-blade design. It includes a round OEM rubber hub bushing for simple maintenance and reliable fit. It is a suitable upgrade for performance-minded boaters seeking stronger acceleration and better bow lift without switching to stainless steel.
- Best for 40–140 HP BRP/Johnson/Evinrude/OMC stern drives
- 13 splines, RH rotation, 3 blades
- Includes OEM rubber hub bushing for easier installation
Caution: Powder coating can wear over time; inspect for chips that might affect balance or trim sensitivity.
WONENGDA 13 1/4×17 Stainless Propeller
This option uses duplex stainless steel for higher durability and corrosion resistance on Yamaha engines in the 60–115 HP range. It features 13 1/4″ diameter, 17″ pitch, three blades, and 15 splines with RH rotation. Stainless steel props can offer improved top-end speed and longer service life in challenging water conditions, though they are typically heavier than aluminum.
- Better for Yamaha 60–115 HP in harsher water or sport-focused use
- Stainless steel construction, 15 splines, RH rotation
- Potentially longer wear life and higher top speed
Limitation: Heavier than aluminum props, which can affect acceleration on lighter boats or lower-powered setups.
Buying Guide
What should you consider when choosing a 13 1/4×17 prop?
- Engine compatibility: Ensure your model and horsepower range match the prop’s supported engines (e.g., Yamaha 60–130 HP, BRP/Johnson 40–140 HP).
- Rotation and hub type: Confirm RH rotation and the correct spline count (commonly 15 splines) and hub design for your gearcase.
- Material choice: Aluminum props are lighter and affordable; stainless steel options offer durability and higher speed but cost more and weigh more.
- Balance and fit: OEM-style blade geometry helps maintain RPMs and efficiency; check for hub compatibility and heat-treated blades where indicated.
- Intended use: Choose based on cruising efficiency, acceleration needs, and water conditions to avoid excessive wear or underperformance.
Installation notes: After-market props should be balanced and installed with proper torques. If in doubt, consult a professional to avoid damaging gearcase seals or misalignment.
Frequently Asked Questions
- What does 13 1/4×17 refer to? The diameter is 13.25 inches, and the pitch is 17 inches; this affects bite and speed.
- Are aluminum props better than stainless steel? Aluminum is lighter and cheaper; stainless is more durable and can improve top speed in some setups, but weighs more.
- What is 15-spline vs other spline counts? Spline count must match your gearcase shaft to ensure proper fit and engagement.
- Can I mix brands? Compatibility depends on engine model, spline, and hub type; mixing may cause fitment or performance issues.
- Do OEM replacements differ from aftermarket props? OEM replacements aim to match factory blade geometry; aftermarket options may vary in balance and finish.
- Is a stainless prop worth the upgrade for daily use? For areas with repetitive hard use or saltwater conditions, stainless may offer longer life; for casual use, aluminum usually suffices.