When selecting a power trim and tilt system, the goal is reliable motor positioning, easier handling, and enhanced boat performance. This guide highlights five top options ideal for small to mid-sized outboards (up to 35 HP). The best fits are for compact fishing boats, small recreational craft, and light-tow setups where manual tilting is challenging or where precise trim control matters. Below is a concise buyer’s table followed by detailed product sections to help you compare at a glance.
| Product | Best For |
|---|---|
| Camoo PT-35 Tilt and Trim & Wiring Harness Kit | Up to 35 HP motors; bolt-on or clamp-on installations |
| RisWhiteMeteors Outboard Power Trim & Tilt Motor Assembly | Mercury/Mariner 75-115HP style OEM replacements |
| Winibo 8M0055011 Tilt & Trim Assembly | Mercury 30-60HP range; 4-stroke engines |
| Bzcovac PT-35 for CMC Up To 35 HP | CMC and similar 2-35 HP outboards |
| T-H Marine 3002.1017 52100 | CMC PT-35 tilt/trim; up to 35 HP |
Camoo PT-35 Tilt and Trim Kit for Up to 35 HP
The Camoo PT-35 Tilt and Trim Kit is designed for engines up to 35 HP and includes a wiring harness for electric hydraulic operation. Its 5 1/2″ setback is intended to improve boat stability and provide a better bite at higher prop settings. This unit is suitable for bolt-on or clamp-on motors within an 11-inch frame. Best for small bass boats and light craft where mounting space is limited and simple installation is preferred. Caution: verify compatibility with your specific motor model before purchase.
RisWhiteMeteors Replacement Tilt & Trim Assembly
This replacement kit targets Mercury/Mariner outboards in the 75-115 HP family and is a direct bolt-on for compatible OEM models. It uses a heavy-duty hydraulic setup to raise and lower the motor, promoting optimal trim for fuel efficiency and reduced cavitation. Best for boaters with Mercury-brand engines seeking a straightforward, OEM-replacement path. Limitation: designed for specific OEM part correlations; confirm model compatibility before ordering.
Winibo 8M0055011 Tilt & Trim Assembly
Winibo’s 8M0055011 aims at Mercury 30-60 HP four-stroke engines, offering a complete tilt and trim kit with precise adjustment. It’s designed to minimize turbulence and vibration, promoting stability and efficient propeller performance. Best for anglers and small-rive boaters who want smoother operation and easier handling when dialing in trim. Caution: ensure model compatibility with your Mercury engine family and verify mounting hardware clearance on your cowling area.
PT-35 For CMC Up To 35 HP With Wiring Harness
The PT-35 unit from Bzcovac for CMC motors delivers 84 degrees of trim and tilt with a 5 1/2″ setback for stability and improved planing. A wiring harness is included, simplifying wiring hassle on compatible small engines. Best for pilots who require ergonomic lifting and consistent trim performance without a high-cost system. Limitation: designed for CMC and similar 2-35 HP systems; double-check exact model fitment before ordering.
T-H Marine 3002.1017 52100 CMC Tilt & Trim
This T-H Marine model is rated for 35 HP or smaller motors with a 5.5″ setback and 84 degrees of trim/tilt. It’s a straightforward option for CMC PT-35 applications, providing consistent hydraulic actuation. Best for users seeking a reliable OEM-aligned tilt & trim solution with clear installation requirements. Limitation: may require specific mounting patterns; confirm compatibility with your exact CMC setup.
Buying Guide
What should you consider when choosing a power trim and tilt for small outboards?
- Engine compatibility: Confirm HP range (most listed options target 2-35 HP or Mercury/Mariner 75-115HP). Match with your motor model and mounting pattern.
- Mounting and frame space: Check setback (5 1/2″ is common) and whether the unit fits bolt-on or clamp-on installations within your motor cavity.
- Operation type: Electric hydraulic is common and reduces manual effort; ensure your boat’s electrical system can support it.
- Trim range and stake: A wider tilt angle (84 degrees) helps tailor performance under load and water conditions.
- Corrosion resistance: Look for marine-grade materials and sealed components for saltwater and freshwater use.
- Included wiring harness: If you prefer plug-and-play, ensure the kit includes harness connections compatible with your motor.
Frequently Asked Questions
- What does “setback” mean in a trim and tilt kit?
Setback is the distance the motor is moved backward from its mounting point, which can improve stability and prop bite. - Can I install a tilt and trim on any small outboard?
Most units are designed for specific HP ranges and mounting styles; verify compatibility with your engine’s model and mounting frame. - Is electric hydraulic trim easier than manual?
Yes, it reduces effort and allows precise angle changes while underway or at rest. - Do these kits require professional installation?
Many installations are straightforward, but some require wiring and mounting alignment; consult the product’s documentation and a marine technician if unsure. - Will a tilt and trim improve fuel efficiency?
In many cases, proper trim reduces cavitation and drag, which can improve efficiency at cruising speeds.