Answering the needs of boaters with small outboards, these tilt and trim units are chosen for stability, ease of use, and prop control. Ideal buyers include casual weekend boaters, anglers, and small craft enthusiasts who want easier motor positioning, better planing, and prop protection in shallow water. The following selections focus on electric-hydraulic tilt and trim systems designed for engines up to 35 HP, with one higher-capacity option for larger user requirements. A quick comparison is provided below to help narrow choices.
| Product | Best For | Key Benefit |
|---|---|---|
| T-H Marine – 3002.1017 52100 CMC PT-35 | Casual small-boat owners | 84° trim range; 5.5″ setback |
| PT-35 for CMC Outboards Up To 35 HP | Ergonomic tilting | Shift-friendly raise/lower with enhanced back protection |
| Camoo PT-35 Tilt & Trim Kit | DIY installers | Easy installation with 5.5″ setback |
| 3002.1017 52100 for CMC PT-35 Tilt & Trim Up To 35 HP | Stable planing | 84° range; prop protection features |
| Winibo Outboard Tilt & Trim Unit Up To 90HP | Builders planning for upgrades | High payload; corrosion-resistant |
T-H Marine – 3002.1017 52100 CMC PT-35 Tilt And Trim
The PT-35 tilt and trim unit is rated for 35 HP and smaller motors, featuring a 5.5″ setback to improve boat stability and performance, and a broad 84-degree trim and tilt range. Best for boaters seeking a compact, reliable system that improves control during acceleration and maneuvering. A potential limitation is that performance claims are aligned with engines up to 35 HP, so consider upgrades if you anticipate higher horsepower in the future.
PT-35 for CMC Outboard Motors Up To 35 HP
This model emphasizes enhanced stability with a 5 1/2-inch setback, enabling the prop to bite higher in the prop shaft for better acceleration. It also provides a simple switch to raise the motor, protecting the prop from shallow-water debris and reducing manual effort. Best for budget-conscious buyers who want ergonomic operation and straightforward installation. Caution: ensure compatibility with your exact motor model and mounting pattern before purchasing.
Camoo PT-35 Tilt & Trim Kit for 35 HP Outboards
The Camoo kit supports up to 35 HP with a 5 1/2″ setback, designed for bolt-on or clamp-on motors within an 11-inch frame. It offers 84 degrees of trim and tilt for versatile motor positioning. Best for DIY installers seeking an affordable, versatile upgrade. Limitation: installation clarity varies by motor model; confirm bolt patterns and electrical wiring compatibility before purchasing.
3002.1017 52100 For CMC PT-35 Tilt & Trim Up To 35 HP
This unit emphasizes stability with the same 5 1/2-inch setback and 84-degree tilt range, providing a robust option for keeping a small outboard optimized for planing speed. Best for buyers seeking consistent performance and a proven design. Limitation: some kits may require additional mounting hardware depending on the boat setup.
Winibo Outboard Tilt & Trim Unit Up To 90HP
Winibo’s tilt and trim unit handles motors up to 90 HP, featuring a high payload capacity (about 150 kg / 330 lb) and corrosion-resistant aluminum construction. Best for builders planning future upgrades or needing a heavier-duty solution in rough conditions. Caution: higher payload capacity means more mounting considerations and potential fitment checks for your boat transom.
Buying Guide
What to look for when choosing a tilt and trim unit for small outboards
- Horsepower compatibility: Most options target engines up to 35 HP; choose higher capacity only if you anticipate upgrading to larger motors (e.g., Winibo for up to 90 HP).
- Setback and stability: A 5.5-inch setback improves stability and prop performance; confirm your boat’s stern clearance and prop height requirements.
- Range of motion: An 84-degree trim and tilt range provides flexibility for various loads and water conditions; ensure this matches your typical operating profile.
- Installation and wiring: Some models include a wiring harness or require additional wiring; verify what’s included and what tools are needed.
- Prop protection: Features that raise the motor to protect the prop are beneficial in shallow or debris-prone waters.
- Ergonomics: Electric-hydraulic systems reduce manual strain; evaluate the ease of use and the control location on your boat.
FAQ
- What HP range do these tilt and trim kits support? Most listed models support up to 35 HP, with some higher-capacity options available (e.g., 90 HP) for future upgrades.
- Do these kits require a separate wiring harness? Some include a harness; others may require you to source one separately. Check product specifics before purchase.
- Is a setback of 5.5 inches standard? Yes, 5.5″ setback is common and improves stability and prop bite at higher prop settings.
- Will these fit bolt-on and clamp-on motors? Many are designed for bolt-on or clamp-on motors within an 11-inch frame, but verify your motor’s mounting pattern.
- Can these units protect the prop from debris? Some models offer simple motor-raise features to protect the prop in shallow water or debris-prone areas.
- Is installation DIY-friendly? Several kits are marketed for DIY installation, but confirm compatibility and required mounting hardware with your specific boat and motor.